Leaking strut is covered by 1-year warranty.
       For extended warranty service to 2 years with extra cost, please contact our sole agent/dealers.
Tarmac Rally

This damper is designed for Tarmac Rally; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Tarmac Rally racing experience.

Top of the line of Tarmac Rally damper
Monotube design, and lightweight aluminum bottom mount.
Larger piston diameter of 45mm, and shock body 51.5mm.
Full ride height adjustable.
30-way adjustable dampening, designed for Tarmac Rally
Both front and rear top mounts are camber adjustable in order
to increase it’s handling
One year limited warranty; replacement for defective strut.
Do not recommend in rally gravel use.
 All applications listed on our website are for 2WD model
unless we specify 4WD.
Aluminum-made Top Mount (A6061)
Each kit comes with pillowball top mount on both front and rear, which enables you to experience excellent handling ever. All the pillowball top mounts in McPherson strut with camber adjustable.
Feature Of Mono Tube Design
Feature of mono tube design is suitable for use in Tarmac Rally coilover system. It keeps damping stability on the uneven road. With larger piston diameter of 45mm, and shock body 51.5mm, it can bear the side way aggressive strong movement. Increase the amount of oil effectively inhibit the oil temperature rise, it can make coilover keeps excellent performance in intense manipulation.
Fully-adjustable Lower Mount
With movable design, both ride height and preload can be adjusted by adjusting the lower mount.
McPherson lower mount

The iron material (SPHC-C) increases the strengths. Avoid the unusual displacement caused by a span of driving after wheel alignment and improving the lower mount deformation resulted from turning pressure.

Wishbone lower mount

Because there is no turning pressure, aluminum material (A6061) is adopted for wishbone lower mount, having ability to reduce weight and dissipate heat effectively.
Damping Adjustable
Tarmac Rally type damper has 30 different way of damping settings enables our products to bring the best performance for different tarmac rally.
All thread parts are coated with Fluorine to prevent corrosion or adherence. The lower mount is made with forged or anodized. All the products made with steel are go through rigid test system.
Coil Spring
Each application comes with pillow ball top mount which can enable you to experience the driving feel directly. All parts are made by high quality (SAE9254). Tarmac Rally damper is equipped with the springs that have the most perfect spring rates.
Hard Rubber
Made with steel (1008A), and forging with high-pressure. With its hardness, it can prevent loose problems when turning McPherson lower mount.
Spring Washer
The piece put between the spring and the locking ring is Iron washer, it can eliminate strange noises efficiency and allow a vehicle to move more smoothly when turning.

This coilover is special designed for Tarmac Rally. It keeps damping stability on the uneven road. Each kit comes with pillowball top mount on both front and rear, which enables you to experience excellent handling ever. All the pillowball top mounts in McPherson strut with camber adjustable. However, because of the design it is easy to create some slight unusual sound when come across big bumps. Basically, all kind of racing coilover is design for performance at special road and is not suggested to be used on road.

The pillowball top mount is able to adjust camber degree and increase stability and handling of your vehicle by 10%. However, the pillowball might be prone to creating slight amount of noise over big bumps, and this does not cover any warranty.
Please answer all questions below and send it back to us, your personal custom coilover kit will be made base on the info provided.
Name :
E-mail address :
Tel :
Vehicle Make :
Model :
Year :
What is your vehicle's horse power?
What is your vehicle's weight? ?Front:
kgs (
lbs), Rear :
kgs (
How's the weather?
A find day
A rainy day
What type of racing event do you participate in?
Gravel Rally
Tarmac Rally
What is your tire camber degree? ?Front:
degree , Rear :
What is your tire toe-in? ?Front:
Rear :
What is your tire toe-out??Front:
Rear :
What is your tire brand? ?
What type of your tires is?
Street tire
Slick tire with lines (soft compound tire)
Racing slick
Rally tire
What is your tire size?
What is your sway bar size? ?Front:?
mm , Rear : ?
Has the off-set of your wheel been modified?
YES, front off-set
, rear off-set
Is there any spacer to be bolted into your wheel?
YES, front
, rear
Does your vehicle have any frame welding?
Designed by ARTWARE
TEL : 886-4-23589111 FAX : 886-4-23589555 © 2013 XYZ AUTO PARTS CO., LTD. All Rights Reserved.
No.16-6, Wenquan Rd., Wuri Dist., Taichung City 41450, Taiwan (R.O.C.)