Leaking strut is covered by 1-year warranty.
       For extended warranty service to 2 years with extra cost, please contact our sole agent/dealers.
Racing Spec

Racing Spec damper is specially made for track race, and all settings have been obtained from direct participation in racing event such as WTCC. In some circumstances, particular custom-made shock absorbers are available for those cars that have aggressive upgrades like factory's racing vehicles or A-class racing cars etc…You may provide us with detailed info on all upgraded parts in your car and what circuit you will run, and we are able to make custom shock absorbers for your personal car.

Top of the line racing damper.
Linear spring SAE9254, the higher rigidity material.
Larger piston diameter of 45mm, and shock body 51.5mm.
Monotube design, and lightweight aluminum bottom mount.
Full ride height adjustable.
30-way adjustable dampening to be able to function and work
for different types of tracks.
ront and rear top mounts with camber adjustment to increase
handling feel.
One year limited warranty; replacement for defective strut.
 All applications listed on our website are for 2WD model
unless we specify 4WD.
Top Mount
Each application comes with pillow ball upper mounts on both fronts and rears, which enable you to experience excellent handling. This can not compare to the OE one. Any pillow ball top mount on McPherson strut has camber adjustability.
Mono-tube Design
Mono-tube design is adopted for this coilover system as it can retain stable damping and have varieties of response to the road conditions. Larger piston diameter of 45mm, and shock body 51.5mm. Based on different models and order requirements, we can make the best damping setting which is suitable for tracking race.
Fully-adjustable Lower Mount
With movable design, both ride height and preload can be adjusted by adjusting the lower mount.
McPherson lower mount

The iron material (SPHC-C) increases the strengths. Avoid the unusual displacement caused by a span of driving after wheel alignment and improving the lower mount deformation resulted from turning pressure.

Wishbone lower mount

Because there is no turning pressure, aluminum material (A6061) is adopted for wishbone lower mount, having ability to reduce weight and dissipate heat effectively.
Damping Adjustable
Racing spec damper has 30-way damping settings to bring the best performance and function for different kinds of tracks.
All threaded parts are coated with Fluorine to prevent corrosion or adherence. A bottom mount is anodized.
Coil Spring
Each application comes with pillow ball top mount to enable you to experience the driving feel directly. Race spec damper is equipped with the springs that have the most perfect spring rates.
Bump Stop
Using high-density polyurethane (PU) to avoid substantial bounce when the coilover bottoming out and reduce the bump cause by bottom-out.
Spring Washer
The piece put between the spring and the locking ring is Iron washer, it can eliminate strange noises and allow a vehicle to move more smoothly when turning.

The pillowball top mount is able to adjust camber degree and increase stability and handling of your vehicle by 10%. However, the pillowball might be prone to creating slight amount of noise over big bumps, and this does not cover any warranty.
Please answer all questions below and send it back to us, your personal custom coilover kit will be made base on the info provided.
Name :
E-mail address :
Tel :
Vehicle Make :
Model :
Year :
What is your vehicle's horse power?
What is your vehicle's weight? ?Front:
kgs (
lbs), Rear :
kgs (
How's the weather?
A find day
A rainy day
What type of racing event do you participate in?
Gravel Rally
Tarmac Rally
What is your tire camber degree? ?Front:
degree , Rear :
What is your tire toe-in? ?Front:
Rear :
What is your tire toe-out??Front:
Rear :
What is your tire brand? ?
What type of your tires is?
Street tire
Slick tire with lines (soft compound tire)
Racing slick
Rally tire
What is your tire size?
What is your sway bar size? ?Front:?
mm , Rear : ?
Has the off-set of your wheel been modified?
YES, front off-set
, rear off-set
Is there any spacer to be bolted into your wheel?
YES, front
, rear
Does your vehicle have any frame welding?
Designed by ARTWARE
TEL : 886-4-23589111 FAX : 886-4-23589555 © 2013 XYZ AUTO PARTS CO., LTD. All Rights Reserved.
No.16-6, Wenquan Rd., Wuri Dist., Taichung City 41450, Taiwan (R.O.C.)