 Top
mount
In XYZ standard design on
shock absorbers in Super Sport (SS), all McPherson struts come
with pillow ball upper mounts and Wishbone struts are equipped
with aluminum top mounts. The pillowball top mount or aluminum
top mount is not available for a few certain applications due
to the OE upper mount with no holes on it.
PS) The pillow ball top
mount is able to adjust camber degree, and to increases
stability and handling of your vehicle by 10%. However, the
pillow ball might be prone to creating slight amount of noise
over big bumps, and this does not cover any
warranty.
 Mono-tube
design
Mono-tube design is adopted for this coilover
system as it can retain stable damping and have varieties of
response to uneven roads and bumps to keep the comfort. The
super sport damper with big piston diameter of 45mm can be
used for weekend race as well.
Fully-adjustable lower mount
A moveable bottom mount
is adopted; both ride-height and pre-load can be adjusted by
adjusting the bottom mount. Use of aluminum material enables
to reduce weight.
 Damping
adjustable
Super sport damper has 30-way damping
settings to bring the best performance for different road
conditions. The shock uses needle valve to have linear damping
adjustment at each level.
Anti-rust
All threaded parts are coated with
Fluorine to prevent corrosion or adherence. A bottom mount is
anodized.
 Coil
spring
99% applications come with pillow ball upper
mount to enable you to experience the driving feel directly.
Super Sport damper is equipped with the springs that have the
most perfect spring rates.
Aluminum bottom mount
Lightweight aluminum bottom
mount is used to reduce the weight and to have ability to
dissipate heat.
 Spring
bearing
The piece put between the spring and the
locking ring is Teflon bearing, it can eliminate strange
noises and allow a vehicle to move more smoothly when
turning.
| 
